| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name , MS, CHST* PHONE NUMBER AVAILABLE ***LinkedIn: m-s-chst-Street Address b8aPROFESSIONAL PROFILEThirty plus year EHS Professional with Environmental, industrial hygiene, loss control/risk management, and safety experience to achieve progressive safety culture for accident prevention, risk management, and environmental sustainability for various industries to include: construction, local government, manufacturing, biotech, food production, healthcare, warehousing, military, and transportation. Skill set includes:OSHA/EPA/DOT/NFPA/CDC/FDA Regulatory ComplianceOSHA, EPA, DOT TrainingRisk Management/Loss Control Risk Assessments GL, PD, WCJob Hazard Analysis (JHA) and Hazard/Risk AssessmentsQuality Control and Quality Assurance (Six Sigma, Lean)Environmental Management Systems (ISO 9001, ISO 14001, ISO 18001.OSHA VPP, NSC Campbell AwardEmergency Response and Disaster Recovery ServicesPublic Global Health Workplace and Construction InitiativesEnvironmental Justice Advocacy, Environmental SustainabilityEDUCATION, CERTIFICATIONS, AND AFFILIATIONSBS Biology (Pre-med) Mississippi Valley State UniversityMSEnvironmental Health University of Washington, SeattleAssociate Safety Professional (ASP) 2024Certified Safety Professional (CSP) 2025Construction Health and Safety Technician (CHST)National Safety Council CPR/First Aid/AED CertificationOSHA 30 Construction IndustryMental Health First Aid CertificationNational Safety Advanced Safety CertificateEPA Master Home EnvironmentalistWhos Who Among EnvironmentalistsAmerican Society of Safety ProfessionalsNational Safety CouncilAmerican Industrial Hygiene AssociationNational Environmental Health AssociationWashington Metro Area Construction Safety AssociationNational Association of Black Women in ConstructionSELECTED ACCOMPLISHMENTSManufacturing experience includes implementing and maintaining corporate process control safety systems guidelines, policies, and procedures for all operating facilities (PSM,RMP, and nonregulated). Maintain close working relationship with business unit process safety, operations, maintenance, and engineering leads to ensure continuous business success with best safety practices.Department of Defense -National Naval Medical Center, Veterans Administration, US Army Center for Human Health Promotion, Fort Belvoir VA, and Fort Meade MD compliance support given in the areas of industrial hygiene, environmental - ambient air quality, risk management, and construction contractor safety. Developed and implemented technical operational forms and programs as a SME to include: user manuals, employee handbooks, standard operating procedures (SOP), job hazard analyses, troubleshooting guides, legal disclaimers, software user documentation, incident investigation forms, mission statements, OSHA/EPA/DOT/ACOR EM385 required recordkeeping, white papers, social media posts, and performance/operations forecast formal report.COVID-19 Safety and Infectious Disease (OSHA/CDC/WHO compliance) training and consulting to healthcare, construction, office administration, pharmaceutical/biotech, churches, schools/colleges on best practices to address COVID-19 and Infectious disease. Conduct risk assessments for developing and implementing COVID 19/Infectious Disease Emergency Preparedness Programs.SME on safety construction training and management regarding accident prevention, OSHA compliance, and the impact on language and culture diversity to risk. (CHST, OSHA Authorized Trainer, TESOL (ESL Spanish, Japanese, French, Turkish, Arabic, Russian, and Portuguese) Instructor 2012 - 2019)Trained and Consulted in Workplace Safety Compliance over 500 Safety Professionals representing numerous industries in obtaining their National Safety Council Advanced Safety Certificate and/or Excellence Performance Rating of their Safety Management Systems. (Senior Safety Consultant, National Safety Council, 2016-2018)Developed and implemented strategic EHS employee program of 38 clinical pathology laboratories across 27 states for safety culture enhancement and continuous improvement of best practices due to company growth and acquisition. (Corporate Environmental Health and Safety Manager, Quest Diagnostics/AmeriPath,, 2009-2011)Developed and implemented the first ever employee health and safety occupational program for a municipality of 2500 employees across 18 departments for risk management and regulatory compliance to include a fleet safety program for 110 commercial operators and 1000 commercial vehicles. (Safety Director, City of Alexandria, VA, 2000-2006) Developed and implemented Homeland Security Program and Policies upon public safety emergency response given to Pentagon during 9/11.PROFESSIONAL EXPERIENCEWorkplace English and Safety Trainer/Consultant (Independent) July, 2013-PresentWashington, DC/Baltimore, MD metro area and Jackson, MS areaConduct OSHA 10/30 Construction Industry, OSHA HAZWOPER, Safeserv, COVID-19 Workplace Safety, and Workforce Development for various worksites in various industries (e.g., construction, hospitality, maintenance, parks & recreation, healthcare) globally such as healthcare, pharmaceutical/biotech, auto manufacturing, construction, food manufacturing, telecommunications and office administrative industries on COVID 19 Workplace Safety. English as a Second Language (ESL) Workforce Training includes teaching low English literacy immigrant speakers workplace safety and workforce development training utilizing ESL Teaching methods for construction, military, hospitality (restaurant/hotels), healthcare, and business (office administration) industries. Teaching objectives address: COVID 19 exposure, colorism/racism, safety culture, risk management, accident prevention, program support, OSHA compliance and professional development, Customized Workforce English training.DC Office of Employment Services, Washington, DCConstruction Trainer and Workforce Apprenticeship Coordinator June -August, 2022Conduct construction industry overview outreach training using Home Builders Institute curriculum. Develop and coordinate construction industry mentorships, apprenticeships, and internships in Marion Barry Summer Youth Employment Program (WDC) comprised of 16 24 year olds. Taught and provided career readiness opportunities in architect, engineer, safety, accounting, realtor, and skilled labor (welders) positions. Tutored in CPR/First Aid training, OSHA 30, and Flagger certification.Trinity Safety Group, Indianapolis, Indiana Oct 2020- Jan 2022Safety ConsultantServe as ROCIP Safety Representative to Washington, DC Water Sewer Construction Project involving a complete renovation and overhaul of the wastewater treatment plant, residential drinking water system, and replacement of lead pipes. Provide safety support with job hazard analyses; accident Prevention Program development and implementation; conduct and design training program; safety compliance recordkeeping; audits and inspections; accident prevention; and risk management.Shimadzu Scientific, Inc, Columbia, MarylandSafety/Quality Assurance Consultant (Contract) May 2018 May 2019Assisted Senior Management in promoting Safety and Quality as an integral part of business culture through regulatory compliance, safety/quality program implementation, and accident prevention. Developed SDS Online Management System to comply with HAZCOM and Emergency Response OSHA Compliance Programs for Corporate Headquarters covering 1362 chemicals over two buildings consisting of laboratories, warehouse, and administrative offices.Reviewed and updated Job Safety Analyses for approximately 200 employees representing lab tech, warehouse workers, management, and administrative officers to promote accident prevention. Conducted OSHA 10 Hour training to reduce injuries the areas of: ergonomics, falls, chemical exposure, hazardous materials, material handling, and motor vehicle accidents.National Safety Council, Itasca, IllinoisSenior Safety Consultant July 2016 April 2018Worked from home in Laurel, Maryland with 80% travel to nonprofit association 55,000 membership base to provide workplace safety compliance training in various industries for completion of Advanced Safety Certificate to include: Principles of Occupational Safety and Health, Fundamentals of Industrial Hygiene, Safety Training Methods, and Safety Management Techniques.Consulted chemical, manufacturing, healthcare, biotech, security, IT, military, government, construction, and transportation industries on achieving excellence in their Safety Management Systems by evaluating the following areas: Management Leadership and Commitment; System Management & Communications; Assessments, Audits & Performance Measurements; Hazard Identification& Risk Reduction; Workplace Design & Engineering; Operational Processes & Procedures; Workforce Involvement; Motivation, Behavior, and Attitudes; and Training & Orientation.Ft. Belvoir, VA and Ft. Meade, MD(Diversified Safety Services Contractor)Construction Site Safety Officer Oct 2014- Oct, 2016, Feb, 2012 Feb, 2013Ft. Belvoir, VA - Provided OSHA, EPA, DOT, NFPA and EM 385-1-1 compliance assistance to renovation of gym facility, locker room, and addition of data center room. Provided specific safety compliance support in electrical safety pulling conduit, ppe, ladder safety, mechanical, scaffold, brick layer, ergonomics, silica, cement, and fall protection. Fort Meade, MD Provided OSHA, EPA, NFPA and EM 385-1-1 compliance assistance to $3 Billion LIVEWIRE project involving a comprehensive electrical generator and switchgear installation with extensive conduit and wire pulling. Developed and implemented Job Safety Analyses, Risk Assessments, Incident Investigations and Training to address project safety concerns such as: fall protection, mechanical and electrical demolition, arc flash, excavation, confined spaces, personal protective equipment, welding, fire safety, electrical safety, lockout/tagout, emergency response. Washington, DC provided OSHA, EPA, DOT, and EM 385-1-1 compliance assistance support to mechanical renovation project at US Capitol. Safety concerns included: lockout/tagout, confined spaces, scaffolding, personal protective equipment, fire safety, and welding.Veterans Affairs Medical Center (VAMC), (MSS Services Contractor) Washington DCConstruction Safety Engineer Sept, 2013 -Sept, 2014Provided construction safety compliance oversight to six projects: (1) renovation of front entrance, (2) parking garage extension, (3) administrative office wing (modular construction), (4) research lab center (new construction), (5) new nurses wing, and (6) extension of emergency room department. Monitored Pre-Phase Planning, Job Hazard Analysis and Safety Task Assignment (STA) done for all divisions of work operations and activities performed on projects. Scheduled and chaired monthly Construction Safety Committee Meeting for all Project Managers, Contracting Officers, and other personnel as appropriate to ensure compliance with VAMC Contractor Safety Program. Conducted daily site inspections for safety and health compliance. Investigated life safety code issues and performed life safety code inspections for Joint Commission accreditation standards in the areas of building code (healthcare environment) deficiencies; construction related deficiencies; and maintenance and repairs. Safety Concerns included: JHAs, steel erection, noise, dust, asbestos, PPE, fire safety, welding, ladders, and fall protection.General Motors/(Aerotek Contractor)Construction Site Safety Officer July, 2011 Jan, 2012Provided site safety support to the third-phase of the electric motor plant new construction project to include: site inspections, job hazard analyses, construction project progress meetings, risk mitigation, toolbox/new hire safety orientation, OSHA/EPA/DOT compliance, and QA/QC assistance. Extensive safety program support in emergency response, lockout/tagout, arc flash, crane lifts, rigging, personal protective equipment, and confined space.Quest Diagnostics/AmeriPath, Addison, TexasCorporate Environmental Health and Safety Manager March 2009 March, 2011Administrated employee environmental health and safety and fleet safety programs providing active, ongoing support to global AmeriPath/Quest Diagnostics clinical pathology laboratories for: injury prevention and regulatory compliance (OSHA, EPA, DOT, CDC, CLIA, IATA, CAP, JCAHO, NFPA, and ANSI), training, outreach, and environmental sustainability.Maintained a proactive Risk Management program to include administrate third party administrator functions of worker compensation, commercial, auto, liability insurance programs; facilitated legal matters, crisis management and business continuityRELATIVE EXPERIENCECity of Alexandria, VA Jan 2000 April 2006Safety OfficerDeveloped and implemented employee City safety program for 2500 employees comprised of 18 departments. Administrated and directed major hazard identification and control activities for OSHA, Homeland Security, EPA, DOT, and NFPA compliance in the following departments with supervisors & committees: Fire, Police, Sheriff, Utilities, Construction & Facilities, Recreation & Parks, Health Department, Hospitals, School Board. Safety compliance in OSHA 500/501 10 and 30 Hour General Industry training, infection control, homeland security, worker zone safety, CPR/First Aid, traffic control and defensive driving. Administrated DOT fleet safety program. Conducted risk management survey assessments, loss control trending, vehicle inspections, incident investigation, drug/alcohol testing, medical treatment, work comp claims management, general liability claims management, property damage claims management, auto liability claims management, expert witness testimony.Safety Trainer/Consultant (Independent) with Manufacturing Industry July 2013 PresentManufacturing Industries/Companies include ECS Refining, Metalspro, Nissan, General Motors, Toyota, Continental Tires, Hartmann, Aptiv, Quest Diagnositcs, PECO Foods, Tyson Chicken, Sanderson Farms, Dr Pepper/Kuerig, Levi Strauss, Domino Sugar, McCormick, Nestle, Freshly Salads, General Electric, Kellogg, ThyssenKrupp.Implemented and maintained corporate process control safety systems guidelines, policies, and procedures for all operating facilities (PSM, RMP, and nonregulated). Maintain close working relationship with business unit process safety, operations, maintenance, and engineering leads to ensure continuous business success with best safety practices. Drafting policies to cultivate a proactive culture of safety and health to comply with regulations and recordkeeping responsibilities of OSHA, EPA, DOT, and ACE. Risk assessment and Job Hazard Analyses for domestic (US) and International (ISO) facilities. Conducted periodic internal company comprehensive safety program audits and routine facility and equipment inspections to promote safety through employee engagement and investigate accidents. Conduct and coordinate classroom, online, and field safety training and presentations to educate workers on safety and accident prevention; e.g, OSHA 10, Hazwoper, DOT, and ESL Workforce Safety. Specific safety skill set used include; but not limited to: process safety management, machine guarding, lockout/tagout, PPE, emergency response, hazardous waste, contractor safety management, welding, hot works, fire prevention, materials handling, stormwater, and wastewater. Sought to benefit top organization by improving performance, return on investments, and quality through safety training and management system programming. Specific soft skills include: Microsoft Office (Word, Powerpoint, Excel, and Outlook). Industry specific OSHA and EPA regulatory recordkeeping and permitting, strong written and verbal communication skills, detail-oriented, flexible, results-driven and a team player. |
