| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name
PHONE NUMBER AVAILABLEEMAIL AVAILABLEStreet Address
ExperienceProduction Technician II Baxter HealthcareMay 2023-September 2024Communicated effectively with department employees, management, and maintenance.Operated assembly equipmentSet-up machine parameters per operating procedures.Performed line clearance, quality checks, and required mechanical adjustments to machine.Ensured raw materials, printing and packaging materials were ready for production.Used blueprints, specifications, Bill of Materials, and Standard Operating Procedures to ensure product or process acceptability.Reported abnormalities and corrective action to supervision.Complied with Good Documentation Practices.Participated in and complete all required training. Participate in the training of new personnel.Maintain good housekeeping in the working area and lead 6S responsibilities as assigned.Performed all other duties and responsibilities as determined by supervision/management.Assured line is set up with proper materials per the Bill of Material (BOM), verify batch documents are correct per filling schedule and documents are maintained inside appropriate batch folder.Determined staffing requirements to meet the production schedule and adjust staffing accordingly throughout the shift to meet plant goals.Initiated batch and exception documents as required needed.Performed production related task per appropriate procedure and verify all entries were documented correctly during your shift. Execute Batch/Code changes as well as sublots when assigned.Performed required quality checks per appropriate Packing SOP and document results in Assemble Pack or appropriate batch documents.Worked with the Production Technician 2 and/or maintenance, monitor all line equipment operations to optimize line performance.Perform the job duties of other line personnel while relieving for breaks, if applicable. (Supporting batch change process on other linesetc.)Communicated with the Filling Line when situations arise that may affect quality, process scrap and/or daily production.Maintained the Packing area in an audit ready state by using 6S principles daily.Notified supervision and take appropriate action when a safety, quality, mechanical or personnel issue is identified immediately upon detection.Documented daily production and equipment issues in shift notes if applicable.Ensured all personnel performed tasks on your line are properly trained, certified, and/or qualified.Trained new PTIs on responsible processes.Shipping and Receiving Clerk SPM Oil and GasJuly 2021-July 2022Performed material handling and warehousing functions required in the receiving, processing, sorting, moving, packing, and shipping of parts, materials equipment, and supplies.Loaded and unloaded incoming stock from trucksPull and palletized ordersOperated forkliftPerformed other duties as necessary in support of team objectivesShop Technician Magna Imperior SystemsApril 2020-July 2021Performed semi-skilled production work to assemble cells, including cutting membranes, mesh, spacers and soldering.Ensure product and process quality and efficiency through appropriate inspection and continuous improvement problem solving activities.Performed all work in compliance with Magna Imperior SystemsPerformed other duties as necessary in support of team objectives.Hose Assembler Magna Gates Engineering and ServicesJanuary 2020-April 2020Assembled hoses.Operated hose assembly equipment such as manual saws, automatic saws and hydraulic crimping machines.Used measuring tools such as tape measures and calipersValve Technician Franklin ValvesJanuary 2019-April 2019Assembled D-711 Valves that contains bonnet, lower plate, slips, plug and an operator.Knowledge with dashboard reading.Welding Mechanic Alfa LavalJune 2017 -August 2018Trouble shoot and repair compablocs, to the heartInspect, disassemble, repair, assemble and pressure test unitsFollow the quality plan per job to repair productsRemoved baffle cages, columns, top head and bottom headDye pinned heart of compabloc and nozzlesTested compablocs : CP-20; CP-30-; CP-40; CP-75 ; CP-400 and CP- 500 up to 600 PSISeparation Experience: Lynx 40; Lynx 400; and Lynx 500Forklift Operator Pro Staff (Daikins)October 2016-February 2017Used material handling equipment such as cherry picker, stand up lift, sit down lifts and tugger lights to move components and material throughout work areaAssembler TPI StaffingApril 2016-September 2016Made limit gears and torque switchesBuilt hand wheel shafts and retainer gears for housing of unitsData entryTear Down Technician TPI StaffingDecember 2015-March 2016Disassembled valves, sand blasted and sent for inspectionAssessed parts for defectsAssembler LK Jordan (C&J Energy)February 2015-April 2015Used material handling equipment to move components and material throughout the work areaAssembled pipeline for oil/gasActuator Assembler Lead CameronApril 2013-August 2014Cleaned corrosive deposits from parts using solventspaint valve fitting and other devices.Tested valves, actuators and level gauges for leaks.Used Optimus operating system to process orders.Used material handling equipment to move components and material throughout work areaExperience with CC20 chokes including blue print reading, triple SSS, keavernerss, CC 70 chokes,stainless steel valves, enkeniels valves, MAsAssisted with orientation and teaching other workers proper techniques and procedures.Ensured that all components have been accepted and correspond to the assembly work order and blueprint while keeping parts organizedTubing experience with gate valve and actuatorsInventoryQuality Control inspectionBurnett Staffing CameronMarch 2011- April 2013Cleaned corrosive deposits from parts using solvents, compound 320, 220 and 180paint valve fitting and other devices; test valves, actuators and level gauges for leaks.Used Optimus operating system to process ordersUsed material handling equipment to move components and material throughout work area; Used material handling equipment to move components and material throughout work areaExperience with CC20 chokes, triple SSS, keaveners, CC 70 chokes, stainless steel valves, enkeniels valvesEnsure that all components have been accepted and correspond to the assembly work order and blueprint while keeping parts organizedValve Technician Valvtechnologies IncorporatedNovember 2005 -August 2010Lapped and painted valve fittings.Cleaned corrosive deposits from parts using solvents.Utilized forklift to transport material and parts throughout warehouse.Mixed compound 320, 220 and 180Read mills off of endcap and ballsEducationADiploma, Ruleville Central High SchoolSkillsLeadership Data analysis CommunicationOrganization Problem-solving InventoryAssembly Documentation Good Manufacturing PracticesPrioritizing Basic Computer Skills |
