| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidate Candidate's Name
Very punctual
Reliable and honest employee that works well with a team or individually
Able to operate most hand tools, machinery & assorted power equipment
Possess valid driver s license & eager to travel for work
Mechanically inclined with a keen sense for details
Hard working individual with good work ethics
315 Daniel Trent Way Kingsland, Ga 31548 PHONE NUMBER AVAILABLE EMAIL AVAILABLE
WORK EXPERIENCE
Atlanta O ce Rennovation Inc. Welder
01/2018 to 09/2018, Atlanta, Ga
Tack Welding o ce cubicles (SMAW)7018
Performed welds on gates, fences etc. (SMAW)7018
(Metal thickness 1/4 -1 )
Performed General labor duties at selected construction sites
Trinity Rail Operations Welder
10/2018 to 03/2019, Cartersville, Ga
Completed 2 week employee training course (GMAW-FCAW) Vertical up and down and horizontal push and pull
Built and renovated various rails (GMAW-FCAW) 0.35 and 0.45 Wire (1/2 -1 ) Metal Thicknes
Used both Plasma and Oxy acetylene torch cutter
Used carbon arc to remove welds
Read understood Blue Prints
Overhead crane certi ed
Also utilized pulse arc welding when needed
Schnabel Foundation Co Welder/ Laborer
03/2019 to 05/2020, Atlanta, GA
Applied SMAW Process to reinforce rebar, weld clips and plates to support foundation 7018 5 32 welding rods and 7018
1/8 rods
Up to 3 Metal thickness
Bridge/root welding used regularly
Used shovel to dig trenches and ll craters
Performed general labor duties around the site
Xl Specialized Trailers Welder
07/2020 to 01/2021, Manchester, Ia
Built and assembled trailers and trailer parts from fabricated material
Welded entire trailer together after tacking and building (GMAW-FCAW)
Used both plasma and torch cutters
Used carbon arc to remove welds
Read and understood blue prints
Performed Vertical up and down, Horizontal push and pull, Overhead and pipe welds using
FCAW0.35 and 0.45 wire.
Metal Thickness (1 -2 ).
GMAW wire size: 3/32 and 1/16th wire
Used various tools such as tape measure, L square, T square, Leveler, C clamps, Bessy clamps, come along chains etc.
Overhead crane certi ed
Farmtek Welder/ Fabricator
01/2021 to 06/2021, Dyersville, IA
Mig Pulse Arc process utilized
(GMAW- FCAW) 0.35 and 0.45 wire/ 3/32 and 1/16th wire
Metal Thickness (3/4 -1/12 ).
Repair broken or cracked parts and lls holes
Prepares broken parts for welding by grooving or scar ng surfaces.
Chips off excess weld, slag, and spatter.
Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form
speci ed depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
Welds in at, horizontal or vertical , and overhead positions
Fincantieri Marine Welder
06/2021 to 04/2023, Marinette, WI
Pulse Arc Mig utilized
Aluminum Mig Welder
Completed 2 Week Aluminum Mig welding training course. Fillet and Groove Certi ed.
Fitted Parts using various tools and table measure.
Metal Thickness: 5mm-20mm
Wire Sizes: 5356.
Built Modules and panels using aluminum Mig Welding Process.
Applied Fillet welds to Navy vessel parts using FCAW.
Wire sizes: .035 and .045
Applied Fillet welds for parts using Aluminum mig welding
Metal sizes ranged from 1/8 -3/8
04/2023 to 06/2023, Stoughton, WI
Pulse arc mig occasionally used.
Set up various parts and assemblies for welding.
Set machines up for carbon and stainless steel of various gauges.
Place and move blocking, braces and jigs to hold parts
Grind or chip rough edges, surplus weld, or scale.
Position and turn clamps, and bolt together straps or parts.
Operate overhead cranes, hoists and other lifting devices.
Performed vertical up and down, Horizontal push and pull, at, overhead using (GMAW- FCAW) 0.35 and 0.45 wire.
Metal Thickness (3/4 -1 ).
Progress Rails Welder
12/2023 to 02/2024, Cleveland, Ohio
Assembled and welded material into nishing product using FCAW
Utilized .045 wire size
Operated and angle grinders, plasma cutting
Read blueprints and schematics
Metal material: steel
EDUCATION
Camden County High School High School Diploma
05/2014 to 05/2018
Tulsa Welding School Welding Certi cate
07/2021 to 01/2022
SKILLS
Shipyard Experience In- Shop Experience Flux Core Welding Mig Welding Pulse Arc Welding Stick Welding Carbon
Arc Gouging Aluminum Carbon Steel Mild Steel Power Tools Blueprint Reading Fabrication Warehouse Experience
|
