| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name
Street Address
PHONE NUMBER AVAILABLE EMAIL AVAILABLEElectrical and computer engineering graduate with functional test engineering electronics experience in the electronics manufacturing and engineering lab fields seeking a mid-level electrical engineering related position.ACCOMPLISHMENTSTrained and directed operators and technicians in customers flagship network optical product functional test operations, troubleshooting, and repair areas in a clean room environment.Repaired equipment by troubleshooting to faulty module or component.Helped production team meet production quotas by fixing process and test issues.Worked with operators to solve production floor problems.Operated and maintained electronic equipment associated with nuclear reactor operation and safety.Performed preventive and corrective maintenance tasks to maintain nuclear reactor safety including electronic and mechanical instrument alignment and calibration using electronic, hydraulic, and radiological test equipment.Trained and supervised junior personnel in the performance of complex electronic, electro-hydraulic, and radiological maintenance and repair tasks.EDUCATIONTexas State University (San Marcos, Texas) MayMaster of Science in Computer ScienceTexas State University (San Marcos, Texas) May 2024Bachelor of Science in Computer ScienceUniversity of Texas at El Paso (El Paso, Texas) May 2004Bachelor of Science in Electrical EngineeringNaval Nuclear Power Training Unit (Idaho Falls, ID) Jan 1995Initial Nuclear Reactor Operator QualificationNaval Nuclear Propulsion School, NNPTC (Orlando, FL) Jun 1994Nuclear Propulsion Operator/Technician CertificationNaval Nuclear Field Electronics School, NNPTC (Orlando, FL) Dec 1993Nuclear Field Electronics Technician CertificationSKILLSTools / Computer Languages LanguagesC++ Fluent in EnglishLinux Proficient in SpanishJavaAssembly (Intel 80386)Cisco Diagnostic SoftwareCisco Internetwork Operating System (IOS) SoftwareEXPERIENCEBAE SystemsTest Technician III Jan 2019 Apr 2024Performed functional tests on various electronics product lines.Performed flying probe testing ( using SPEA 4040 and Takaya APT-1400F ) on various circuit cards and debugged flying probe programs to minimize false failures. Escalated tester issues TE or Test Support if malfunction was beyond the scope of test tech duties.Performed bed of nails testing on various product using HP 3070 Series3 and Series 7 testers.Troubleshot card failures to the component level.Worked with test engineering to solve production floor problems.Gained proficiency in the use of schematics, drawings, and lab equipment.Ran functional tests on CCAs that were line by line procedures that could take hours.Used drawings and schematics to run and test product.Advanced Micro DevicesEngineering Technician April 2017 - Oct 2018Staged test setups. Performed tests to duplicate customer issues. Work with other engineering team members to arrive at solutions to customer issues.Ran benchmark tests with various processors in server systems for submission to SPEC CPU publication.Wrote shell scripts in Linux and .bat files in various Windows operating systems to test various NIC card performance.Troubleshot faulty systems and replaced faulty modules.Performed testing with virtual machines using various Linux and Windows operating systemsApplied Materials Nov 2016 - Mar 2017Engineering TechnicianPerformed final manufacturing testing on metal deposition process affiliated silicon wafer chambers including physical vapor deposition, chemical vapor deposition, and pre-clean chambers.Facilitated chambers with gases, water, pressurized air, and high voltage prior to testing, performed system functional tests, then de-facilitated systems for shipment to customer.Troubleshot wafer processing machines and repaired gas, water, pneumatic, faulty component, DeviceNet, and erroneous build issues associated with chambers.Uninstalled and reinstalled cabling and pneumatic lines as required in troubleshooting process.Verified proper assembly during troubleshooting process by referring to CAD drawings and BOMs.Work conducted in an ISO Class 6 clean room.Flextronics Corporation Feb 2015- Mar 2016Functional Test Engineering TechnicianTrained incoming test engineer on basic trouble shooting procedures for Cisco Carrier Routing System 1 ( CRS-1 ) hardware using Cisco diagnostic and IOS software.Provided end to end test support in a ISO Class 6 clean room functional test environment including AVIT ( Automated visual inspection data acquisition for all switch card optical interfaces, P2C ( Ambient diagnostic functional testing of product ), 2C ( Low temperature and high temperature functional testing of product ), Parametric ( Optical testing of optical fabric card hardware ), and SNT ( Low temperature and high temperature simulated network testing of optical and electrical hardware ). AVIT was a three stage robot. Worked with Test Maintenance team when replacing lead screw XYZ stages and motors. Troubleshot data acquisition cameras.Calibrated machine to faciliate image capture. Verified machine was functioning correctly before realeasing to run production boards..Performed test support utilizing UNIX based servers that implemented scripts which operated vendor hardware via vendor software.Troubleshot and repaired functional test equipment issues with minimal supervision.Performed troubleshoot and repair of CRS-1 switch fabric cards in all test areas using software tools, hardware tools, and schematics.Upgraded FPD firmware on Cisco SC-22GE-B shelf controllers for test purposes.Upgraded and downgraded Cisco IOS software as required for testing purposes.Flextronics Corporation Jun 2012-Feb 2015Optical Process Engineering TechnicianProvide test support for CRS-1 switch fabric cards in a clean room environment.Troubleshot and repaired optical switch fabric card automated visual inspection tools.Diagnosed optical network switching hardware field failures.Evaluated fiber optic cabling media production failures using customer andvendor specifications and guidelines.Trained and directed operations personnel and technicians in the movement and evaluation of product.Analyzed fiber optic cable failures, found failure root cause, and provided feedback to supplier quality, engineering and customer teams.Pulled test records from UNIX servers when optical devices failed and submitted components and data to vendor for failure analysis.Troubleshot and repaired Cisco CRS-1 switch fabric cards undergoing optical tests in Cisco Parametric Platform testers.Performed failure modes and effects analysis with Cisco and Molex Engineering concerning Cisco CRS-1 optical field failures.Documented and archived optical functional test and process defects.Generated quality notifications and provided defect and test data for vendor side defects to Supplier Quality Engineering for part cost recovery from vendor.Assumed all duties of the outgoing optical process engineer when engineer was moved to different product.Flextronics Corporations Mar 2008 - Jun 2012Technical Quality AuditorMonitored production yields and suspended testing when yield triggers were hit.Worked with productions technicians to understand and evaluate product failures then informed test engineer team for rectification.Provided engineering team with test data when low production yields occurred.Monitored production modules to verify testing procedural compliance.Worked with production personnel to find low production yield root causes.Flextronics Corporation Oct 2006- Mar 2008Line Maintenance TechnicianPerformed corrective and preventative maintenance on Cisco Internet Server Business Unit, Gigabit Switch Router, and CRS-1 functional test infrastructure equipment.Troubleshot and repaired network hardware failures to the faulty module.Built network test infrastructure. Test chambers contained Cisco chassis (Full-Q (16 slot) ), Half-Q ( 8 slot ), or Mini-Q ( 4 slot fabric chassis ) ). Chamber UNIX test server communicated with routers or shelf controllers via Cisco Catalyst switches and routers (terminal servers). Assembled all cabling including heat shrink as required.Full Time Student and Job Seeker Mar 1999- May 2005Used Verilog, VHDL, Python, Matlab, and Simulink for school projects.United States Navy Mar 1993 Mar 1999Electronics Technician / Nuclear Propulsion Plant OperatorOperated Naval Nuclear Reactors as the reactor operator during startup, transient, and shutdown operations.Performed preventive and corrective maintenance on nuclear instrumentation systems, primary plant instrumentation systems, calorimetric calibration instrumentation systems, steam generator water level control systems, reactor rod control systems, reactor compartment isolationApplied Materials Nov 2016 - Mar 2017Engineering TechnicianPerformed final manufacturing testing on metal deposition process affiliated silicon wafer chambers including physical vapor deposition, chemical vapor deposition, and pre-clean chambers.Facilitated chambers with gases, water, pressurized air, and high voltage prior to testing, performed system functional tests, then de-facilitated systems for shipment to customer.Troubleshot wafer processing machines and repaired gas, water, pneumatic, faulty component, DeviceNet, and erroneous build issues associated with chambers.Uninstalled and reinstalled, electical cabling, pneumatic lines,and high voltage lines ( 440 V ) as required in troubleshooting process and the functional test process.Verified proper assembly during troubleshooting process by referring to CAD drawings and BOMs.Work conducted in an ISO Class 6 clean room.Flextronics Corporation Feb 2015- Mar 2016Functional Test Engineering TechnicianTrained incoming test engineer on basic trouble shooting procedures for Cisco Carrier Routing System 1 ( CRS-1 ) hardware using Cisco diagnostic and IOS software.Provided end to end test support in a ISO Class 6 clean room functional test environment including AVIT ( Automated visual inspection data acquisition for all switch card optical interfaces, P2C ( Ambient diagnostic functional testing of product ), 2C ( Low temperature and high temperature functional testing of product ), Parametric ( Optical testing of optical fabric card hardware ), and SNT ( Low temperature and high temperature simulated network testing of optical and electrical hardware ). AVIT was a three stage robot. Worked with Test Maintenance team when replacing lead screw XYZ stages and motors. Troubleshot data acquisition cameras.Calibrated machine to faciliate image capture. Verified machine was functioning correctly before realeasing to run production boards..Performed test support utilizing UNIX based servers that implemented scripts which operated vendor hardware via vendor software.Troubleshot and repaired functional test equipment issues with minimal supervision.Performed troubleshoot and repair of CRS-1 switch fabric cards in all test areas using software tools, hardware tools, and schematics.Upgraded FPD firmware on Cisco SC-22GE-B shelf controllers for test purposes.Upgraded and downgraded Cisco IOS software as required for testing purposes.Flextronics Corporation Jun 2012-Feb 2015Optical Process Engineering TechnicianProvide test support for CRS-1 switch fabric cards in a clean room environment.Troubleshot and repaired optical switch fabric card automated visual inspection tools.Diagnosed optical network switching hardware field failures.Evaluated fiber optic cabling media production failures using customer andvendor specifications and guidelines.Trained and directed operations personnel and technicians in the movement and evaluation of product.Analyzed fiber optic cable failures, found failure root cause, and provided feedback to supplier quality, engineering and customer teams.Pulled test records from UNIX servers when optical devices failed and submitted components and data to vendor for failure analysis.Troubleshot and repaired Cisco CRS-1 switch fabric cards undergoing optical tests in Cisco Parametric Platform testers.Performed failure modes and effects analysis with Cisco and Molex Engineering concerning Cisco CRS-1 optical field failures.Documented and archived optical functional test and process defects.Generated quality notifications and provided defect and test data for vendor side defects to Supplier Quality Engineering for part cost recovery from vendor.Assumed all duties of the outgoing optical process engineer when engineer was moved to to a different product.Flextronics Corporations Mar 2008 - Jun 2012Technical Quality AuditorMonitored production yields and suspended testing when yield triggers were hit.Worked with productions technicians to understand and evaluate product failures then informed test engineer team for rectification.Provided engineering team with test data when low production yields occurred.Monitored production modules to verify testing procedural compliance.Worked with production personnel to find low production yield root causes.Flextronics Corporation Oct 2006- Mar 2008Line Maintenance TechnicianPerformed corrective and preventative maintenance on Cisco Internet Server Business Unit, Gigabit Switch Router, and CRS-1 functional test infrastructure equipment.Troubleshot and repaired network hardware failures to the faulty module.Built network test infrastructure. Test chambers contained Cisco chassis (Full-Q (16 slot) ), Half-Q ( 8 slot ), or Mini-Q ( 4 slot fabric chassis ) ). Chamber UNIX test server communicated with routers or shelf controllers via Cisco Catalyst switches and routers (terminal servers). Assembled all cabling including heat shrink as required.Lower Colorado River Authority May 2005 - Oct 2005Electrical EngineerReviewed electrical substation drawings to insert under-frequency relays at strategicEast Texas electrical grid location, as instructed Relays allowed for load stripping on the grid.Modified substation panel drawings that were then sealed by a Professional Engineer prior to being implemented.Perform substation surveys to verify existing substation configuration and current work.Full Time Student and Job Seeker Mar 1999- May 2005Used Verilog, VHDL, Python, Matlab, and Simulink for school projects.United States Navy Mar 1993 Mar 1999Electronics Technician / Nuclear Propulsion Plant OperatorOperated Naval Nuclear Reactors as the reactor operator during startup, transient, and shutdown operations.Performed preventive and corrective maintenance on nuclear instrumentation systems, primary plant instrumentation systems, calorimetric calibration instrumentation systems, steam generator water level control systems, reactor rod control systems, reactor compartment isolation instrumentation systems, air particulate detector systems, and core protection instrumentation systems using procedures in the Reactor Plant Manual.Trained junior personnel in the performance of maintenance on reactor plant systems.Maintained shutdown nuclear reactor plant parameters in specified operational bands to prevent core and/or equipment damage.Coordinated complex shutdown and at-power plant maintenance operations in conjunction with various plant personnel. |
