| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name , P.E.Principal Electrical EngineerStreet Address Montclair BlvdSugar Land, Texas Street Address
Cell Tel.: PHONE NUMBER AVAILABLEHome: PHONE NUMBER AVAILABLEEmail: EMAIL AVAILABLESUMMARYProfessional Engineer with more than 40 years of experience in Project Management of engineering and construction for domestic and international market including power generation and distribution for onshore and offshore facilities. Projects include 13.8 kV power generations, distribution and 115 kV transmission, electrical system studies, motor control, variable frequency drives, large motors starting and system stability. Site work includes installation, construction, supervision, start up and commissioning.EXPERIENCE2020-2022 No Work due to covid2022-PresentElectrical Power Engineer, Contractor.(Remote Work)Work as a contractor for Lutech Technology on a project in Houston Texas. The project is a study to eliminate fossil fuel and use electrical power to eliminate as much as possible emission of CO2.Developed Distribution scheme for 245 MVA at 35 kV power distribution substation with multiple loops with 5 MW distribution transformers.Develop overall One-line Diagram, size and specify Equipment, define area classifications.2019-2020 MCDERMOTT INTRENATIONAL INC. HOUSTON, TXPRINCIPAL ELECTRICAL ENGINEER:Lead Electrical Engineer for Gas Process Plant in Freeport Texas. Excess gas production to be used for feed gas to site power generation. GE Frame 7 was considered. Tie in with Utility Grid was through Step Up Transformer at 115 kV. Black start was required to power Gas Turbine auxiliaries and provide power during plant start up. Large Gas compressor motor 60,000 HP selection was considered with VFD starting. Only FEED Engineering was done before contract was halted by Client Request2014-2019 JGC AMERICA, INC. HOUSTON, TXPRINCIPAL ELECTRICAL ENGINEERLead Electrical Engineer for PTTGC Ethane Cracker FEED Project, Responsible for all electrical engineering, design, RFQ Evaluation of Engineered Equipment and coordination with construction partners Bechtel and Samsung.Review and prepare Estimate for Pre-FEED Alaska LNG Project. Prepare Cost Estimate for installation, evaluate conditions for load estimate for early works and plant operations. This included marine offloading facilities, construction camp, temporary construction power and permanent operating power. Evaluate differential cost between purchased and site generating power.2011-2014 SK E & C, HOUSTON, TXELECTRCAL DEPARTMENT MANAGERManage a department with six engineers, Design and procurement of system and equipment for 300 MW coal fired power plant in Panama. Design Blackout system for starting. Work on Estimates for multiple EPC Projects in USA and Latin America.Prepare FEED deliverables for Magnolia LNG Project (8MTPA) in Lake Charles, LA. Deliverables included Load Flow and Electrical Studies. Assist Client during FERC Permit/ License Approval.2004-2011 MUSTANG ENGINEERING, HOUSTON, TXLEAD ELECTRICAL ENGINEERWorked on Sandridge Energy, FT STOCTON, TX Grassroots design gas plant with power distribution at 13.8 kV with Redundant Oil Filled Power Transformers, Coordinate with Utility requirements for HV Metering and Protection. Work on design for large motors staring and ensure safety of for automatic selective power distribution system.Serve as Lead Electrical Engineer for Trunkline LNG Lake Charles, LA. New LNG Air Vaporization Unit and one new NGL Recovery Unit required for LNG conditioning. Electrical distribution at 34.5 kV with oil filled redundant transformers. SCADA panel and Automation schemes were developed to control equipment and relay information from unattended buildings and work areas2003-2004 CONTRACT WORK, RICHMOND, CAAs Lead Engineer responsible for design and procurement for 35 mW non-condensing steam turbine generator unit with GSU, PCR and Auxiliaries.Evaluate and replace obsolete equipment and feed critical loads from new 18/24 mVA oil filled transformers and new 13.8 kV Switchgear. Upgrade electrical protection and supervisory equipment2002-2003 DRESSER RAND< HOUSTON, TXELECTRICAL ENGINEERFront End engineering design for power conversion packages on gas and steam turbines, large AC motors and variable speed drives for Petrobras. Developed specifications for electrical equipment. System capacity specifications to accommodate motor starting and acceleration (3x28.5 mW gas turbine generators and 3x 14,000 HP Induction Motors)2000-2002 CONTRACT WORK, HOUSTON, TXPROJECT ENGINEER, DOW CHEMICALPerformed grassroots design and upgrade design of new and existing power plants to include 15 kV power Distribution system with Switchgear and MCCS. Developed scope of work recommendations through participation in meetings and conducting on site visits to the facilityPROJECT ENGINEER, DUKE / FLUOR DANIELEngineering design of the interconnecting services on a 1600 mW Power Plant Project (MOAPA, NV) to include two cogeneration trains each consisting of two gas turbines, GEF-7 with HRSG and a Steam turbine. Hydrogen cooled generators rated 138 mW.Review turbine generator controls and protection. Procure major electrical equipment1993-2000 SAUDI ARAMCO, RAS TANURA, SALEAD ELECTRICAL ENGINEERDirect supervisory of preliminary design and scope of work on 1.3 Billion Dollars upgrade project for Ras Tanura Refinery. Continued as lead electrical engineer on site after completing in London the design phase at Bechtels office.Worked on 115 kV Transmission Lines maintenance around Abqaiq and Uthmania.1985-1992 SILVER DUNES LTD, HAMBURG GERMANYResponsible for a team of 15 engineers and designers on Marine and onshore projects including design and construction of childrens hospital with associated housing projects in Riyadh, SA.Supervise engineering design and construction of Motor Luxury Yach (Lady Moura). Cost of project was about $ 130 Million. Shipyard was BLOHM & Voss in Hamburg.1982-1985 ALISSA MAINTENANCE AND ELECTRICAL CO. RIYADH, SAGENERAL MANGERManage daily affairs of construction company in Riyadh, SA. Projects include cable laying for local utilities, electrical and HVAC installation and repair for housing and commercial facilities.1980-1982 MANUFATURER REP. SELF EMPLOYEDSelf employed worked as electrical engineer under contract to Aramco Services. Project included offshore platforms in Qatif and Manifa, Saudi Arabia.1973-1980 KEMCO DOHA, QATARGENERAL MANAGERRan daily operation of an electrical and mechanical company. Negotiated contracts and represented international companies such as York Air Conditioning, Pirelli Cables and Brush motors.1969-1973 EARL & WRIGHT CONSULTING ENGINEERS, HOUSTON, TXCHIEF ELECTRICAL ENGINEERDesign electrical system for offshore and onshore facilities. Main assignment was to work as lead electrical engineer on the Thistle Field offshore platform in North Sea. Earl and Wright Had a joint venture with CJB (CONSTRUCTOR JOHN BROWN).Two small Pratt & Whitney Gas Turbines were used on Platforms to generate power.1966-1969 WESTINGHOUSE CORP. HOUSTON, TXSERVICE ENGINEERWorked within the Steam Division to follow construction and maintenance of gas and steam turbines for the southwest area of the U.S.Gas Turbine size varied from 30 mW to 50 mW. They were used as peaking units for utilities.EDUCATIONBS ELECTRICAL ENGINEERINGUT AUSTIN 1965 |
