| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name
Cell Ph. # PHONE NUMBER AVAILABLEEmail : Candidate's Name @Hotmail.comMay Street Address
* OBJECTIVE *I am seeking employment as a Civil Engineer /Structural Designer. Industries include commercial and residential building construction / maintenance refurbishment, brownfield site plan development, subdivisions, plant maintenance, crane design. Duties of detailing steel frames and concrete foundations. Pre-engineered RF, (pick steel & concrete.) I perform Civil /Structural design works related to commercial structures & site plan development.I work as a member of engineering teams, as consulting or construction/design-build auspice for owners in the private which services include design build contracting and consulting. Projects include civil & commercial building structures, including site planning, erosion control, pre-post storm water/ sanitary piping/ management facility design. (Infrastructure, roads, and piping networks).Industries: Commercial Building and retrofit, - Civil Engineering Infrastructure. Jobs associated with: Civil / Structural Site manager/ CAD Designer / Builder. I also produce plats, architectural plans /elevations using C3d, for civil site development projects and maps.I perform Civil/ Structural Design analysis for Pre-engineered buildings foundations, construction and steel detailing for up to three story steel framed buildings per AISC 360. Incorporate software of STAAD structural design analysis.The design methods employed with conformance to Building construction-UBC, IBC, Concrete-ACI-318, AISC 360 Steel, CMAA cranes.Work also includes horizontal and site plan development and grading with surveying support included within ACAD Civil 3d software. Site plan development includes lot layout, Logistic support areas (LSAs) subdivision layout, and municipalities with Cad production drawings.Intergovernmental Cost estimates (IGCE) generate a bill of materials for concrete and steel detailing. Experience in writing SOWS and IGCE and five years in LOGCAP and AFCAP design build or augmentation projects as a field engineer.I have practiced with Unified Facilities Guide Specifications (UFGS) for Military Departments; for over ten years in the field working on engineering teams.Ive been working with and in the skilled building trades for twenty (20) years including holding a Civil General Foreman position and Engineer in Training certificate. The work includes the planning and performance stages of construction and site plan development.Incorporated software: (AutoCAD, MicroStation, Civil 3dv., STAAD; Enercalc}EDUCATION:Rochester Institute of Technology- B.S. Civil Engineering -Graduated May 2002Land Surveying equipment GPS Leica 1200; Reinforced Concrete Foundation design; Frame analysis; Structural Design/ detailing, drafting- steel design meth A.S.D. & L.R.F.D., STAAD,U.S.N. Engineering Aid- U.S. Navy- A school Gulfport, Miss.- Honorable dischargeEIT- Pennsylvania December 2016SKILLS:CSA -Civil, Structural, Architectural: CAD & Structural analysis with detailing, Steel, Timber design, Concrete foundations also Pre Engineered buildingsCAD Civil 3d v. 2013- 2019; proficient with surfaces & grading. Commercial building demolition and refurbishment with building layouts.Steel Building concrete foundation- using STAAD software (AISC 360, following concrete manual ACI 318Civil design expertise in grading and topology with post-construction storm water control and civil structures, piping network or surface- Storm sewer designExperienced general foreman in the commercial building construction industry regarding concrete foundations- shallow foundation and concrete acp piles & mats for towers, silos and building construction. (3000-30,000 sq. ft).; Site plan Devt. Grading plats up to 5 sq. mile basesAcad-Civil3d v. 2012-2019 surfaces, grading, pipe networks, Hydrocad* WORK EXPERIENCE *K2 Engineering Uniontown, Pa. 15401Civil Structural Architectural engineer 06/2023- presentI perform steel detailing and concrete design & drafting for commercial buildings. Work includes design and drafting of footers and concrete foundations for Metal Building Systems and Pre- engineered buildings.KBR Parkersburg, West Virginia Civil Structural Designer- 01/2022- 04/2023.Washington Works Plant- Drafting and Design for steel building mods and steel deck platforms for the process piping plant. tower mat concrete foundations. Steel detailing methods of ASD, LRFDCAD Production drawings with MicroStation /AutoCAD, STAAD.KBR Houston, Texas Military contractor -Saudi Arabia (PSAB) contract 01/2021- 10/2021I worked as Civil/Structural Engineer. I wrote an IDIQ (indefinite delivery, quantities) specifications for paving and wrote sows for PWS (performance work statement) engineering construction for the base. The standard and specifications including concrete and asphalt paving, for LSAs and airfield. I designed footers and concrete foundations for Metal Building Systems and Pre- engineered buildings.Assisted in site plan development for roads, culverts and for a water distribution network and Pump house design which included a system/pump curve for a new water distribution plan for the base.T3 Global Bridgeville, Pa. Cad Designer 04/2019 03/2020I performed residential subdivision layout with AutoCAD civil 3d software. Work included the construction horizontal grading of plats, creating surfaces, and set erosion control of plats with drainage ponds and piping. I utilized boundary maps with erosion control and storm water mitigation. I designed and sized subdivision plans with road corridors, infiltration ponds, sanitary piping, potable & storm water piping with Civil 3d piping networks. I assisted in the permitting process for EPA and Pennsylvania DEP.IAP/ RMS Panama City, Fla. Military Contractor Engineer at Bagram Airbase Civil / Structural Site Manager 02/2018-04/2019I worked as contractor being the site manager and engineering team leader. I was responsible for timely submittal of design documents to the Commanding officers representative (COR) of our assigned U.S. Air force unit. My work included the Civil & Structural disciplines along with being the site subject matter expert in paving and PEBs foundations. I performed design submittal drawings and design build construction specifications in the form of SOWS. (Scope of work) Work included as built inclusion of base mapping, maintenance and refurbish of buildings projects. I aided the Project Controls Engineer with duties including 1) Detective part of taking contractors receipts and comparing to schedule for detecting fraud or abuse. 2) inspection verifying submitted drawings are up to Dept of State and IBC & UFC specs. 3)corrective action for schedule delays by negotiating independently as consultant / mitigator between the designer and the contractor, for effective in augmenting Project planning and site plan development.Scope of work (SOW) and IGCE Estimate / Bill of materials. I also acted as site manager and performed management document reporting to corporate.Page, Southerly Austin, Texas Civil Designer, Municipalities 03/2017- 02/ 2018I used the design criteria of the DEP of Austin County, Texas, to make utility and site plan drawings from C3d. The work included erosion control and drainage structures for subdivisions. Work included the construction layout for retention & infiltration ponds. I assisted in the permitting process with corrections/ punch lists, for subdivision construction work. I made drainage boundary maps in Cad, overlaid with soil maps for storm water mitigation design. (TR55- Time of concentration, SCS (soil conservation service) and drainage criteria design. I made C3d grading & topos.Odom Trucking/Empire Spring, TX. Land Developer 01/2017-03/2017I made land plats using C.A.D. I worked for the land developer. I utilized surface and aerial topography for the creation of parcels and site plan with utilities. Work included the land clearing as horizontal equipment operator / and survey stakeout. Work was located in the private land appurtenances of the greater Houston, Texas area.Vectrus Colorado Springs, Colo. Qatar/CAS Civil Engineering Tech. 12/2015- 12/ 2016U.S. military contractor- Civil engineering. I updated base map utilities. I tracked O & M work and updated the base master plan drawing for utility as-built mapping. I created CAD production drawings using AutoCAD 2015, & Civil 3d. I made plan and profile road design. I worked in new & refurbish construction projects. I performed structural steel and reinforced concrete design. I made design submittals including the creation of scope of work and IGCE estimates.GAI Consultants Homestead, PA 15120 CAD Designer 07/2014- 07/ 2015I worked as a lead Cad Designer. My job was to generate production drawings for bids & working plans. I performed civil site design with finish grading for gas compressor pads including access roads and piping networks. I utilized geo-spatial data, xrefs, aerials and environmental features for post construction drainage design.Sallyport GlobalMcLean,VA 22101 Military contract, Cad-Designer 03/2012-03/2013CAD designer, generated working drawings for construction & preliminary design- build contract work, architectural, civil structures, site plans, and coord. Map, plan and profile, highway, electrical, mechanical. Worked for military contractor.Louis Berger CAD-Designer - project SISP 08/ 2010-12/ 2010Provide highway design drafting of road for design- build contractor in Sudan.K.B.R.- Houston, TX Civil Principal, Military contractor Iraq, SWA10/2004- 02/ 2010Civil Engineering Principal. I worked in the design-build, commercial construction, and logistics industry for a U.S. military- design build general contractor. I performed base mapping with site plan development utilizing AutoCAD Civil 3d, geospatial data and field surveys. I also performed inspections of site installations. I worked with and made Cad base maps & drawings of 3000-100,000 sq ft. plats. The drawings included design and survey stakeout for living areas for base contingency and military personnel. Work was deemed as mission critical to U.S. military logistics. The work included coordinate map generation of FOBS and military installations in country. I designed concrete and steel for commercial building projects. I provided pipe networks, drainage basins and access roads.Project examples:K2 Engineering, Uniontown, PA.- Pre Eng building 60 ft span foundations, Steel mainframe design facility of 25-ton bridge craneKBR, Parkersburg, West Virginia- 45 ft silo 45-ton mat featured concrete matSteel framing platforms with projecting belly tanks; Steel building detailed 50 ft span STAAD-K.B.R. -Iraq & various sites in Afghanistan- 2004-2012Land surveying & survey-stakeout for housing and utilities. I performed site grading, design build for towers, and force protection structures. I worked as Civil Engineer, / CAD Surveyor/ Civil General Foreman Engineering teams stationed on sites throughout Iraq, and Afghanistan. I also made field visits in transit by helicopter from bases throughout Iraq performing reconnaissance pertaining to site plan development for design- build construction projects. I setup GPS/ land surveying base reference surveys & monuments. I installed containerized housing, sanitary and water supply. I designed foundations and structures of pre- engineered steel buildings, towers, and force protection.CAD Steel Detailer Dynasteel Corp. Memphis, TN 01/ 2003-03/2004Steel detailing (CAD) for commercial ductwork.Project Engineer Gould Erectors/Riggers/Flack Crane, Glenmont, N.Y.- 2001- 02/2002 (COOP) Steel design & 2001- 02/2002 detailing, field engineering, crane rigging -heavy-haul, constructionLicenseFE/EIT Pennsylvania License # ET023329* REFERENCES * provided upon request |
