| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name
Street Address Street Address
Oxford, N.Y. Street Address
Email: EMAIL AVAILABLECell: PHONE NUMBER AVAILABLEOverviewMy Lead Installer experience is extensive, in all aspects of Telecommunication Installation.I can run jobs from start to finish with no supervisionWork HistoryCrase Communications.04/21/2018 to PresentWhile with this company I have utilized my professionalismI have learned and practiced since I began in the telecommunication industry.My job duties entailed installing all model of Ciena equipment and provisioned this equipment. I also would do FOC and OTDR testing on the fiber rings that the Company First Light was upgrading.DJN Services and Consulting INC.11/14/2017 to 04/21/2018I was working on a project for ERICSSON. As an OSP technician.This involved fishing a fiber cable from the telco box to a SPRINTCabinet. Then doing fiber readings and documenting COPs.STRATIEGIC DIRECT SOLLUTIONS.11/16/15 to 11/14/2017ADRAN TEST AND TURN UP AND PROVISSIONER.I would provision cards for ADTRAN TA5000 and TA5200 and 2820S.I would then do the test and turn ups.Professional Teleconcepts - Norwich, NY10/15/14 to 11/16/15DC Power Lead InstallerInstalled -48VDC and +24VDC primary power plants in AT&T and Verizon Cell sites. (Swapping out 2v and 12v batteries)This activity included the following:Disconnecting the power in the cell sites to there BDFBsUnstrapping the batteries (2 volt or 12 volt) in a -48 plant or a + 24 plant configurationRemove the batteries and their support structure.Reconfigure new Battery Mounting structure and secure it to the floor.Install and Strap new battery plantRun, Stitch, Lace and Tag new cables, if required.Configure Rectifiers, Inverters and AlarmsComplete all close-out paperwork and pictures, documenting work performed at site.Email completion package to Customer.MidState CommunicationsOriskany Falls, NY8/12/14 - 10/04/14RF TechnicianPerformed RF service calls and resolved maintenance issues. In addition, I installed lights, sirens and 2-way radios in public service vehicles.Strategic Direct Solutions, LLC (Contacted to YPSG)Dallas Texas6/15/14 - 8/12/14Telecommunications Technician IIIInstalled, Tested and Provisioned Fujitsu equipment such as 4100s 4800s 9600s from mounting the bays to running and terminating all cabling and doing all labeling according to Telco standards.Telforce.Bristol, Tennessee3/18/2014 - 6/09/14DC Power TechnicianI performed Primary Power upgrades (swap outs) at wireless cell sites for AT&T and Verizon. This activity included the following;Disconnecting the power in the cell sites to there BDFBsUnstrapping the batteries (2 volt or 12 volt) in a -48 plant or a + 24 plant configurationRemove the batteries and their support structure.Reconfigure new Battery Mounting structure and secure it to the floor.Install and Strap new battery plantRun, Stitch, Lace and Tag new cables, if required.Complete all close-out paperwork and pictures, documenting work performed at site.Email completion package to Customer.Travcom (Contracted to Windstream)Kentucky12/28/13 - 3/05/14Telecommunication InstallerWindstream stopped using Comforce as a contracting company and to keep my position I had to switch companies.COMFORCE (Contracted to Windstream)Duluth, Georgia7/25/13-12/27/13Telecommunications Technician/InstallerInstalled Adtran equipment mounting the shelves and running and terminating all cables for these shelves. I was labeling all the equipment and cables according to specs and telco standards. I was also installing Ciena equipment and all aspects that are required for the installation process. Mounting, cabling, terminating, and labeling. I was also rerouting and running new cables on the MDF for Windstream for their POTS and DSL Blocks. I would then provision this equipment.Strategic Direct Solutions, LLC (Contracted to YPSG)Dallas, Texas8/20/12-7/18/13Telecommunications Install Technician IIIInstalled, Tested and Provisioned Fujitsu equipment such as 4100s 4800s 9600s from mounting the bays to running and terminating all cabling and doing all labeling according to Telco standards.Telco PrimeSeattle, Washington05/05/12-08/14/12Telecommunication Installer IIIInstalled Tektronix equipment and Geo Probes across the United States.Duties included:Mounting cabinets, shelves, running and terminating cablesCommission, Test and Turn-Up of equipmentComplete Close-Out package with the customers.Advance Network ServicesMenands, New York02/02/12 - 05/05/2012Lead Installation TechnicianSupervised projects from start to finish and maintained a strong working relationship with the clients. I performed all aspects of installation and provisioned equipment being installed.Pairgain CommunicationsCicero, New York05/06/2011 - 02/02/2012Installation, Test and Turn-Up TecchnicianInstalled GPS antennas on roof tops of Verizon Central office buildings and performed the test and turn-up. Also, did clock upgrades for synchronization timing, which involved running new cables from the equipment to the new office clocks then cutting them over.T-Staff/ADC (Contracted to Frontier Communications and AT&T)Marrieta, GA10/2006 - 5/2011Telecommunications InstallerWorked in the state of West Virginia doing upgrades for Frontier.Duties included:Installing various Adtran equipment and Fujitsu equipment (i.e. Adtran 1200s, 1248as, 1248s, 5000s, 5006s, and Fujitsu 4100s).Uploaded the software and provisioned equipment into service.Worked throughout the state of Florida performing upgrades at AT&T cell sites.Duties included:Civil and Site Survey activities at new sitesOversaw Trench digging, laying conduit and Building H-FRAMESPerformed core drilling and mounted HOFFMAN, CHARLES, and NEMA boxes.Installed SIAD routers and CONOGA PERKIN panels, and CIENA panels.Installed Cisco routers for AT&T throughout the Eastern coast of the United States in Central office environments as well as cell sites.Installed battery strings, performed hot slides, and terminated of all cables to the equipment installed.Assisted in tear-out activities which included the mining out of old cables and Disconnect/Removal of equipment.AjilonCherry Hill, New Jersey6/03 8/06Site Team LeadDuties included:Installed Nortel Optera Rings in the western part of the United StatesInstalled Succession Switches for Nortel in the state of PennsylvaniaParticipated in a fiber loop project for Nortel throughout the states of Wisconsin and Minnesota.Worked in cell sites on Ericsson equipment doing installs and some optimization of LTE, CDMA and UMTSPerformed transmission and switching work in Verizon and Cingular buildings.Performed all aspects of Installation from reading of prints, mounting bays and building any necessary auxiliary framing.Performed all phases of cabling terminationsOversaw various size jobs and crews of contractors.Worked with the Customer and Engineers to make a job go as planned and made any corrections that was in accordance to installation procedures.Rightech/Tyco/CingularInstaller9/02 6/03Worked in hubs at the base of cell towers. Job entailed reading of prints and checking alarms, mounting auxiliary panels, lugging and crimping of cables, hotslides, setting of rectifiers, and h-tapping for a BTS Nokia project. (These were unmanned environments with no supervision.)Duties included:Mount equipment, run cabling, lug and terminate cablingWire-wrapping, punch-down, crimping RJ 45 connectors on Cat5 cables to be terminated to a patch panel location.All Types of labeling and/or bar coding.Assisted in the final walk-through with Customers to sign off job completionsCOMFORCECortland, N.Y.Installer8/00 9/02Performed various tasks including reading and correcting blue prints, drilling floors, leveling and mounting bays, running, stitching, and terminating cables (power, line, fiber and coax), and building auxiliary framing (ladder rack, unistrut, threaded rod, and aux bar)and fiber duct.Installed the following equipment: Nortel DMS 10,100/200,250,300,500 Voice Modules Access Nodes, jnet to enet conversions, passport bays, and spm bays. Worked on Fujitsu such as FLMs and MUXs, Hendry fuse panels, and Tellabs Titan 5500s, 2600s and the 1024Installed the following: Alcatel, Litespan2000, Cisco Routers; have worked on B.D.F.B.s and Lorains and have assisted the Marconi Company in various power jobs.Installed battery strings and ground bars, AT&T Lineage and Galaxy bays, and all kinds of wire wrapping terminations. Preformed tear outs, mining of cables, and mainframe cut-overs.Professional Teleconcepts - Norwich, NYInstaller12/1995 - 8/2000Performed various tasks including reading and correcting blue prints, drilling floors, leveling and mounting bays, running, stitching, and terminating cables (power, line, fiber and coax), and building auxiliary framing (ladder rack, unistrut, threaded rod, and aux bar)and fiber duct.Installed the following equipment: Nortel DMS 10,100/200,250,300,500 Voice Modules Access Nodes, jnet to enet conversions, passport bays, and spm bays. Worked on Fujitsu such as FLMs and MUXs, Hendry fuse panels, and Tellabs Titan 5500s, 2600s and the 1024Installed the following: Alcatel, Litespan2000, Cisco Routers; have worked on B.D.F.B.s and Lorains and have assisted the Marconi Company in various power jobs.Installed battery strings and ground bars, AT&T Lineage and Galaxy bays, and all kinds of wire wrapping terminations. Preformed tear outs, mining of cables, and mainframe cut-overs.EducationNORWICH HIGH SCHOOLNorwich, NY - 6/88 |
