| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidate Candidate's Name
Street Address Fairmount Av.
Hackensack, NJ Street Address
Email: EMAIL AVAILABLE
PHONE NUMBER AVAILABLE (H) PHONE NUMBER AVAILABLE (Cell)
________________________________________________________________________________
CAREER PROFILE
Experienced in academic lecture of mechanical engineering & sciences courses and in depth research in the
areas of energy, heat transfer, aerodynamics and fluid flow. Performed fluid and thermal experiments,
measurements, data acquisition, and reporting.
Coordinate design of complex capital construction with extensive experience in all phases of capital design
such as mechanical equipment, HVAC, plumbing, steam & hot water distribution systems, structural and
electrical systems. Strategically prioritize, plan, coordinate, and drive projects to ensure on-time, budget-
compliant completion while maintaining high quality design standards. Sets goals, establishes priorities,
manages resources and develops targeted strategies.
Confident and innovative administrator with proven ability to oversee complex and diverse construction
design of high density public housing capital projects. Articulate and collaborative communicator and leader
with talent for developing trusting and productive relationships with senior managers, senior engineers,
colleagues, consultants and contractors.
REGISTRATION
Professional Engineer in States of New York & New Jersey
EDUCATION
Ph.D. Mechanical Engineering (Thermal-Fluid Science) 1990-1994
NYU Polytechnic University, Brooklyn, N.Y., June 1994.
M.S. Mechanical Engineering (Thermal-Fluid Science) 1980-1982
Case Western Reserve University, Cleveland, OH, Jan. 1983.
B.S. Mechanical Engineering 1977-1980
University of Akron, Akron, OH, Jan. 1980.
PROFESSIONAL EXPERIENCE:
City University of NY (CUNY), 555 West 57th Street, NY, NY 10019
Senior University Engineer, Design & Construction Department 2012-Present
Administrating and reviewing mechanical engineering design, retro-commissioning and construction of
new systems such as chillers, boilers, new educational labs, swimming pools, gymnasiums, data centers and
heating & cooling distribution system.
Performed HVAC design and review - including heating and cooling calculations.
2
Coordinated all consultants engineering design review assignments with review team that
included engineers & architects and to make sure all CUNY design requirements are met as per standard and
satisfactory quality.
Prepared consultant task orders for preparation of new engineering design assignments & bid documents.
Oversees the preparation of detailed reports on project progress identifying problems, solutions,
milestones, financial cost projections and analyses.
Provides technical direction to project administrative in support of CUNYs campuses activities; to assist
in the accomplishment of established project goals and objectives including project schedules and budgets.
Explored & reviewed new technological energy savings projects to be implemented in CUNY campuses.
Verified and checked retro-commissioning for facility improvement measures in CUNY campuses by
commissioning agents.
Monitors and facilitates resolution of construction contract and consultant contract disputes and change
orders.
Works with other units/departments/divisions/colleges to coordinate workflow and activities to ensure a
seamless operation.
New York City Housing Authority, 90 Church Street, NY, NY 10007
Deputy Director of Engineering, Design Department 2008-2012
Administrating engineering group including mechanical, electrical, plumbing and structural engineering
sections of capital division with capital division construction federal funded budget in excess of one billion
dollars.
Coordinated all design assignments with senior engineers and engineers and followed up to make sure all
design contract requirements are met as per standard, on time and acceptable quality.
Assisted all other divisions of capital developments and operational divisions to complete their tasks
during constructions. Interacted with all capital program units for scheduling of design projects.
Prepared status reports for director and Assistant to General Manager.
Collaborated with project administrators, cost estimators, consultants and design review staff.
Trained office of design staff on best construction design practices and standards.
Reviewed engineering reports, plans and estimates by senior engineers and engineering staff.
Prepared AE task orders and request for proposals as per need bases.
Investigated new technological energy savings projects to be implemented it in NYCHA developments.
Prepared management and analysis reports.
New York City Housing Authority, 90 Church Street, NY, NY 10007
Senior Mechanical Engineer, Design Department 2002-2008
Reviewed all in house mechanical designs, and engineering reports prepared by engineers to
ensure conformance with project in excess of forty million dollars per year.
Supervised preparation and compliance to scope and budget of construction bid documents.
Prepared updated specifications for all new contracts based on CSI master specifications 2004.
Reviewed complex in house mechanical contracts for installations of steam, hot water boilers and
heating distribution system prepared by professional engineers and assistant engineers.
Assisted all other divisions of Housing Authority to complete their tasks such as construction
management, RFI and punch list.
Troubleshooting of problems with developments heating distribution system.
Prepared project management and survey reports with the recommended course of actions.
2
3
New York City Housing Authority, 90 Church Street, NY, NY 10007
Professional Mechanical Engineer - Design Department 1996-2002
Prepared design bid contracts for mechanical equipment including boilers installation, heating
control system, heating distribution system by hot water or steam and for installation and replacement
of HVAC packaged and split units in the community centers, Stores and developments. Prepared cost
estimates for HVAC systems, pump and piping replacement, and heating control systems.
Made periodic field inspections as deemed necessary for emergency conditions or to complete the
design contracts.
Designed sanitary, HW, CW, and gas piping distribution in buildings and prepared energy
consumption estimation for buildings.
Signing and sealing official documents as a licensed professional engineer
Project manager and field inspector of mechanical and HVAC systems in building construction
Structural inspection of buildings and prepared original and complex reports.
Polytechnic University, Six Metrotech Center, Brooklyn, NY 11201
Research Engineer - Energy Systems Laboratories 1993-1996
Modeled high capacity heat recovery and storage by using phase change materials.
Utilized Phoenics software (control volume) to model heat transfer enhancement inside of
tubes.
Conducted studies to improve performance of fire tube boilers for NYSERDA.
Developed a computer program to estimate thermal characteristics of buried gas pipelines; project
was sponsored by Con-Edison.
Designed, assembled and installed data acquisition systems to monitor thermophysical process
variables at remote sites; remote data access and manipulation via modem.
Analyzed data and proposed energy forecasting models; project was sponsored by Long Island
Lighting Company (LILCO).
Monitored and analyzed performance of natural gas fired heat pump; project was sponsored
by Brooklyn Union Gas Company (BUG).
Research Engineer - Research & Development Center 1983-1989
Conducted research in fluid dynamics, propulsion and vehicle design; established aerodynamics
lab; supervised aerodynamics section; implemented data acquisition, processing, hot wire systems,
and LDA systems for wind tunnel testing; designed and installed vacuum systems.
ACADEMIC EXPERIENCE
NYC College of Technology, 300 Jay St, New York, NY 11201
Adjunct Professor -Department of Environmental Control 2013-present
Taught HVAC Lab.
Polytechnic University, Six Metrotech Center, Brooklyn, NY 11201
Adjunct Professor -Department of Mechanical Engineering 1994-present
4
Taught Aerodynamics, thermodynamics, dynamics, machine design, synthesis of mechanical
systems, and heat transfer.
Teaching fellow; taught numerical methods with computer application (ME 331) and
undergraduate thermal fluid labs
Upgraded and managed fluid-thermal laboratories.
Borough of Manhattan Community College, NY, NY
Adjunct Professor, Department of Science 2001-present
Taught engineering mechanics I, Physics 110.
Polytechnic University, Tehran, Iran 1989-1990
Taught engineering mechanics and numerical methods.
PUBLICATIONS
"Experimental and Analytical Investigation on Ice Formation from a Circular Water Jet Impinging on
a Cold Surface," with M. K. Moallemi, Journal of Heat Transfer, Vol. 116, Nov. (1994), pp. 1016-
1027.
"Experimental Modeling of Hydraulic Jump by the Impingement of a Circular Column on a Horizontal
Disk," with M. K. Moallemi, and M. H. N. Naraghi, in March 1999 issue of Journal of Fluid
Engineering.
"Form-Stable Phase Change Materials for Direct Contact High Capacity Heat Recovery and Storage,"
with M. Syed, S. Kumar, and M. K. Moallemi, in May 1996 issue of ASHRAE Journal.
Gas Consumption and Forecasting, with S. Kumar, and M. K. Moallemi, presented at ISAs 43th
International Instrumentation Symposium (Orlando), May 5-8 1997.
"Stationary Nodes on a Liquid Column Impinging on a Horizontal Flat Surface," with S. Kumar, and
M. K. Moallemi, presented in 1st Pacific Symposium on Flow Visualization and Image Processing
(Honolulu), Feb. 23-26 (1997).
"Experimental Investigation of Surface Tension Effects on the Position of Hydraulic Jump Produced by
the Impingement of a Circular Water Column on a Horizontal Disk," with M. K. Moallemi, and M. H.
N. Naraghi, presented in 1996 ASME/AIChE National Heat Transfer Conference (Houston) , August 3-
6 (1996).
"Wave Formation on the surface of Liquid Film from a Circular Water Jet Impinging on to a Horizontal
Disk," ASME Region II Graduate Student Technical Conference (Brooklyn), April 16 (1993).
"Experiments on Ice Formation from a Circular Water Jet Impinging on a Horizontal Cold Surface,"
with M. K. Moallemi, ASME/AIChE 28th National heat Transfer Conference (San Diego), in
Heat Transfer in Phase Change, pp. 1-8, August 9-12 (1992).
Tc Obj101
4
5
"Thermal Effect of Contacts on the Current-Voltage Characteristics of High Superconductor Films,"
with S. Kumar, 3rd Intersociety Conference on Thermal Phenomena in
Electronic Systems (Austin), February 5-7 (1992).
"A New Interpretation of Heat Transfer Coefficients of Porous Media," with A. Dybbs et al., ASME
Annual Meeting, ASME 84-WA/HT-51 (1984).
"Gas Consumption and Forecasting, Final Report," with S. Kumar, M. K. Moallemi, and G. Vradis,
Energy Systems Laboratories Report, project was sponsored by Long Island Lighting Company
(LILCO), (Dec. 1995).
"Two Heating Seasons Data and Analysis Report," with S. Kumar, and M. K. Moallemi, Energy
Systems Laboratories Report, project was sponsored by Long Island Lighting Company (LILCO),
(1995).
"Non-Intrusive BTU Metering for New York City Housing," with S. Kumar, Energy Systems
Laboratories Report, Project was sponsored by New York City Housing Authority (1995).
"1993-94 Heating Season Data and Analysis Report," with S. Kumar, and M. K. Moallemi, Energy
Systems Laboratories Report, project was sponsored by Long Island Lighting Company (LILCO),
(1994).
"End of Task Report to Long Island Lighting Company," with M. K. Moallemi, and S. Kumar, Energy
Systems Laboratories Report, project was sponsored by LILCO (1994).
"Monitoring and Evaluation of a Gas Engine Heat Pump," with S. Kumar, and M. K. Moallemi,
Energy
Systems Laboratories Report Number ESL 105, project was sponsored by Brooklyn Union Gas
Company (BUG), (1994).
"Aerodynamics Design of a Vehicle with Stability Consideration," R&D Report (1988).
"A Computer Program to Estimate Heat Transfer Characteristics of Combustion Chamber," R&D
Report (1984).
"Design and Construction of a Supersonic Wind Tunnel -15 cm by 15 cm," R&D Report (1984).
DISSERTATION and PROJECTS
Ph.D. Thesis: "An Experimental and Analytical Investigation of Fluid Flow and Heat Transfer
Interactions with Solidification of Liquid Jet Impinging onto a Horizontal Disk," (1994).
Master Thesis: "Heat and Mass Transfer Characteristics of Fiber Metals," (1982).
B.S. Project: "Design and Construction of a Plastic Part Dispenser Machine," (1979).
AFFILIATIONS
Member of ASME, ASHRAE.
6
COMPUTER SKILLS
Intergraph Microstation, Auto-Cad, Microsoft Word, Microsoft Excel, Tecplot, Unix, Fortran, Basic,
Simpler, Phoenics.
6
|
